![\"0415image000\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0415image000.jpg\" "\\"0415image000\\"")
<\/p>\n<\/p>\n
But first, why is this tire bigger then the engine?<\/p>\n
![\"0415image001\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0415image001.jpg\" "\\"0415image001\\"")
<\/p>\n
Had to let the air out again to fit the wheel.<\/p>\n
![\"0415image002\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0415image002.jpg\" "\\"0415image002\\"")
<\/p>\n
the loncin honda 50 (110) is pretty much finished won’t have any light (no coil for it) and the gearing needs changing, it’s very revvy at 30mph<\/p>\n
![\"0415image003\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0415image003.jpg\" "\\"0415image003\\"")
<\/p>\n
Right, here i have finished filing open the swingarm to accept the larger axle.<\/p>\n
![\"0415image004\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0415image004.jpg\" "\\"0415image004\\"")
<\/p>\n
then i tired drilling out the holes in the rxs sprocket to fit the gs rear hub, stuff was way too tough, finally did it with a round file, although it’s not very accurate, it will do until i can afford a new custom one to fit.<\/p>\n
![\"0415image005\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0415image005.jpg\" "\\"0415image005\\"")
<\/p>\n
Used my flat edge thing that i use for putting in engines, and measured thickness of the rim the offset of the edge of the rim to the sprocket face, from the sprocket face to the outer side of the spacer.<\/p>\n
![\"0415image006\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0415image006.jpg\" "\\"0415image006\\"")
<\/p>\n
found out the center of the rim, and figure that i needed to move the gs rim over by 3mm (100.5mm to 97.5mm) also the sprocket needed moving in by 6mm<\/p>\n
![\"0415image008\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0415image008.jpg\" "\\"0415image008\\"")
<\/p>\n
Well got that done in no time, just have to machine 3mm off the spacer and that moved the wheel over, the worst problem right here with taking metal off the sprocket carrier is that the sprocket is no longer aligned with the bearing, i may find a 6mm wider bearing to fit in, it also may cause no trouble at all, but the bearings were fairly seized in the first place so i expect some failure anyway.<\/p>\n
![\"0415image007\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0415image007.jpg\" "\\"0415image007\\"")
<\/p>\n
Next the boring job of painting and hole fixing, i am amazed this thing kept any petrol in it at all.<\/p>\n
![\"0417image002\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0417image002.jpg\" "\\"0417image002\\"")
<\/p>\n
That took a lot longer to do then to put up these two images. Filling the dents and holes will take even longer \ud83d\ude41<\/p>\n
![\"0417image000\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0417image000.jpg\" "\\"0417image000\\"")
<\/p>\n
Back to the rear end, wheel all in now, made up the spacer on the right myself with a file and hacksaw it did not need to be as accurate as the left spacer.<\/p>\n
![\"0417image001\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0417image001.jpg\" "\\"0417image001\\"")
<\/p>\n
Had to beat the old chain adjuster straight(er) to avoid touching the carrier (despite take 3mm off that as well)<\/p>\n
![\"0417image003\"](\"https:\/\/terraroot.neoneoism.com\/wp-content\/uploads\/2009\/04\/0417image003.jpg\" "\\"0417image003\\"")
<\/p>\n
Now with the tank in silver and most of the wheels, might i go with silver all over? was talking the other day and changed my mind again about the black\/yellow idea for the wheels think i should do them a dark almost bronze gold now. Dunno.<\/p>\n","protected":false},"excerpt":{"rendered":"
But first, why is this tire bigger then the engine? Had to let the air out again to fit the wheel. the loncin honda 50 (110) is pretty much finished won’t have any light (no coil for it) and the gearing needs changing, it’s very revvy at 30mph Right, here i have finished filing open […]<\/p>\n","protected":false},"author":964,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[7,10],"tags":[],"class_list":["post-335","post","type-post","status-publish","format-standard","hentry","category-its-not-a-job-its-a-fucking-adventure","category-rxs-100"],"_links":{"self":[{"href":"https:\/\/terraroot.neoneoism.com\/index.php?rest_route=\/wp\/v2\/posts\/335","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/terraroot.neoneoism.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/terraroot.neoneoism.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/terraroot.neoneoism.com\/index.php?rest_route=\/wp\/v2\/users\/964"}],"replies":[{"embeddable":true,"href":"https:\/\/terraroot.neoneoism.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=335"}],"version-history":[{"count":1,"href":"https:\/\/terraroot.neoneoism.com\/index.php?rest_route=\/wp\/v2\/posts\/335\/revisions"}],"predecessor-version":[{"id":340,"href":"https:\/\/terraroot.neoneoism.com\/index.php?rest_route=\/wp\/v2\/posts\/335\/revisions\/340"}],"wp:attachment":[{"href":"https:\/\/terraroot.neoneoism.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=335"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/terraroot.neoneoism.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=335"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/terraroot.neoneoism.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=335"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}