more land rover rust
Paid to get the tracking set rather then messing about with string and finding a flat place
It was a bit out…
About 18mm toe out, should be 2mm toe in 🙂
While it was up on the ramp i had a wander about underneath, lots of rust, this out rigger someone gave up on.
Since i did so well on the xtdr sub frame, decided to do a small patch on the LR. cornflakes box to the rescue!
Just doing this side first, other patch can wait.
Neatly made 3.0mm patch placed.
Got a spot weld or two done, and ran out of wire!
Queue much running about for new wire. the welding didn’t go so well, bit too much rust. The underside was easier because i was welding to the nice thick weld seem running along the chassis.
Tidy up with the angle grinder, then hammered off the drum, brakes are good!
Then went and changed the water for coolant. knew the cap was bad, already have one on order, didn’t think it was this bad.
Welded it up for the crack anyway
Tags: 109", land rover series