Tuesday
didn’t do much,
tiny bit tired don’t you think? also fixed a brake light bulb and gave it a clean my mom is using it this weekend. it’s 0 degrees outside.
-11? ow, it’s -9 for me on the bike, i got ice on top of the box last night, 
was tempted to make a snowball and throw it around the shop
Tuesday
Well left work on Saturday, got a card and some chocolates from Atilla, everyone sad to see me go, especially the manager as he had to hire 3 people to do my job. The last night was comical Hannan (the boss) kept fucking up the address’s and I was too busy clowning around to do much proper delivering. I give em a month, the phone bill will be astronomical from drivers calling customers to find out where there live and nobody will have a clue where that is anyway. New shop tonite I heard the manageress there is hard on incompetence, bit like I was back in GNIC (STRESS!) What do i care anyway Hannan got me this as a going away prezzie.
WTH, indeed.
Had to fix my cbr’s brakes, rhs caliper sticking this time. whipped out dust seals thew em in the bin, carefully took out the piston seals and cleaned behind them before putting them back.
Lots of air bubbles!
Had to take off caliper like this so that the bubbles have a direct path straight up to the master cylinder, after a while pumping the lever one crack of the bleed valve had me some working brakes!
Pictures Of Minors.
Morris minors of course, why what did you think i meant?
morris minor welded to a nissan 200sx, perfect place for a lexus v8. just realized this car is the only one without a roof chop 
Tuesday
Welded up the gaps in my wetal work today, engine comes in and out easly which is a relief. trew on some triflow/hammerite type paint. nearly all the mounts are done with now, the lower rear chain side mount is a bit iffy but that might need alot of reshaping to avoid the chain anyways so i’m gonna leave it for now. might try bargering ted into sorting out the electrics next week. might even start it…
V8!
I did not how ever bend the left front suspension back 2cms. no sir.
what the heck is half that stuff in there?, would love to weld a silvia floorpan to a minor (like cliffb) then stick this V8 in. best i probably stick to a 4age or 4afe for the lightweight win.
yeah I’m getting a minor, i could have a bigger car since it would be tax free, but I like lightweight, and the minor is affordable. and very lightweight.
Tuesday
all the mounts are in, need final welding.
With the big stuff nearly done, (the engine has to come out again to finish) started on the time consuming but easy stuff like cables.
here the rear brake setup is installed, but the engine sits to far out for the original brake pedal, so i cut it off, since ted has no right leg this is not really a problem, we can all use the hand brake.
Is that a little bent? can’t find the right clutch cable, i have one that fits the engine but does not reach the bar, it should because the throttle cable can and does reach. need to mod another cable to (probably another clutch cable) to be the brake cable, which will be installed where there front brake lever would normally be.
